Particle Counter
For Inline Measurement
KL-30B
Liquid-borne Particle Counters
Monitors 0.05 µm particle contamination in pure water
- Integrated unit combines sensor, controller, flow meter, and data storage
- Install directly to pure water line and monitor the process
- Purge air unit installed as standard
- High pressure up to 500 kPa (gauge pressure) applicable
- Equipped with D/A converter (4-20 mA) and alarm output contacts (standard)
- Built-in printer, CompactFlash card can be used (card sold separately)
Specification
| Optical system | Light-scattering method |
|---|---|
| Light source | Laser diode (wavelength 830 nm, rated output 200 mW ) |
| Materials of parts exposed to sample fluid | Synthetic quartz, fluorocarbon rubber, fluoroplastic,PVC, Pyrex glass, SUS304/316, POM |
| Measurement size range | 4 channels (Factory default): ≥0.05 µm, ≥0.1 µm, ≥0.15 µm, ≥0.2 µm Setting range 0.05 µm to 0.2 µm |
| Sanpling Flow rate | Flow rate 10 mL/min and purge flow rate 0.1 to 1 L/min combined (Purge flow rate will differ depending on sample fluid pressure) |
| Maximum particle number concentration | 200,000 particles/mL (coincidence loss 10%) |
| Power requirements | 100 V to 240 V AC, 50/60 Hz, Approx. 80 VA |
| Dimensions | Approx. 230 (H) × 330 (W) × 569 (D) mm |
| Weight | Approx. 19.8 kg |
